燃油喷射部件 - ISO喷油器
低惯量标准喷油器
孔板标准喷油器
轴针式标准喷油器
这是用在喷射泵试验。
我们是领先的制造商和供应商的优质燃油喷射部件。 ISO 喷油器的高度赞赏高效率,流畅的性能和耐用性。他们是理想的柴油车的所有类型,常用于汽车行业的各种应用。我们提供的产品包括元素柱塞,喷油嘴,出油阀,转子头,燃油泵,凸轮盘,进料泵,传动轴,修理工具和修理包,我司通过ISO9001:2008,我们的产品我们提供一年保证。
我们相信,一个油阀,喷油嘴,柱塞,转子头,供水泵,修理包,德尔福喷射阀和共轨零部件的试订单将让你明白我们正在给你提供的产品是多么的物有所值,关于我们完整的产品目录,请与我们联系。
Standard oil injector | ||
Specification Type | Standard oil injectors (low-inertia and orifice-plate type) | Bosc No |
Model | ISO7440B64-20.7 | 1 688 901 101 |
ISO7440B64-25.0 | 1 688 901 102 | |
ISO7440B74-20.7 | 1 688 901 103 | |
ISO7440B74-25.0 | 1 688 901 104 | |
ISO7440B84-20.7 | 1 688 901 105 | |
ISO7440B84-25.0 | 1 688 901 106 | |
ISO7440B54-20.7 | 1 688 901 109 | |
ISO7440B54-25.0 | 1 688 901 110 | |
Opening Pressure | 20.7+0.3Mpa | |
25+0.3Mpa | ||
Orifice Diameter | 0.40.50.60.70.8 | |
Installation Length | 55mm | |
Outer Dimension | 21811548mm | |
Suitable Pump | PWPBPNPW2000P7100BQetc | |
Notes | 1.Check and adjust opening pressure regularly. | |
2.If fuel delivery quantity changes dramaticallyin most cases caused by the orifice blocked by scrap iron. | ||
3.If injectors are assembled after being cleaned or purged,the specific composition of nozzle,orifice,and injection line can not be changed casually. | ||
Specification Type | Standard oil injectors (shaft needle type) | Bosc No |
Model | ISO7440A14-17.2 | 0 681 343 009 |
ISO7440A14-14.7 | 1 688 901 000 | |
Opening Pressure | 7.2+0.3Mpa | |
Orifice Diameter | No | |
Installation Length | 55mm | |
Outer Dimension | 19314040mm | |
Suitable Pump | IIIBAetc | |
Notes | 1.Check and adjust opening pressure regularly. | |
2.If fuel delivery quantity changes dramaticallyin most cases caused by the orifice blocked by scrap iron. | ||
3.If injectors are assembled after being cleaned or purged,the specific composition of nozzle,orifice,and injection line can not be changed casually. | ||
Specification Type | Standard oil injectors (orifice-plate type) | Bosc No |
Model | ISO7440A54-17.2 | |
ISO7440A44-20.7 | 1 688 901 015 | |
ISO7440A54-20.7 | 1 688 901 016 | |
ISO7440A64-20.7 | 1 688 901 017 | |
ISO7440A74-20.7 | 1 688 901 018 | |
ISO7440A84-20.7 | 1 688 901 019 | |
ISO7440A64-17.2 | 1 688 901 020 | |
Opening Pressure | 17.2+0.3Mpa | |
20.7+0.3Mpa | ||
Orifice Diameter | 0.40.50.60.70.8 | |
Installation Length | 55mm | |
Outer Dimension | 23114440mm | |
Suitable Pump | AAWADIetc | |
Notes | 1.Check and adjust opening pressure regularly. | |
2.If fuel delivery quantity changes dramaticallyin most cases caused by the orifice blocked by scrap iron. | ||
3.If injectors are assembled after being cleaned or purged,the specific composition of nozzle,orifice,and injection line can not be changed casually. |